0
Bearbeitungen
Multitouch Table FH Ingolstadt: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Multitouch Table FH Ingolstadt (Quelltext anzeigen)
Version vom 6. Februar 2012, 14:53 Uhr
, 6. Februar 2012→Gameplay
Fake (Diskussion | Beiträge) (→MTT-Construction: Bild dazu und feddsch!) |
Bot (Diskussion | Beiträge) |
||
| (14 dazwischenliegende Versionen von 4 Benutzern werden nicht angezeigt) | |||
|
= Git-Repository =
We created a Git repository for our Multitouch Table Project which contains schematics and layouts for the electronics as well as the source files for our software.
You can [http://git.bingo-ev.de/fh-in/mtt-projekt.git/ view the repository online] or clone it using the following command (read-only access):
git clone http://git.bingo-ev.de/git/fh-in/mtt-projekt.git
= Hardware =
[[Datei:MTT Contruction.JPG|thumb]]
[[Datei:MTT-Construction2.JPG|thumb]]
=== General Remarks ===
All electronics hardware in this project was designed using the free [http://gpleda.org/ gEDA] suite which provides tools for creating schematics and board layouts.
We have created two boards for the Multitouch Table which are described in the following sections. You can download all files from our git repository
=== VSync Processing Board ===
When everyone is done setting up their area, you can tap the START button to start the game.
Digital Technologies are highly interesting but sometimes really confusing, especially while learning the basics.
To understand how combinatorial circuits with some logic gates work, building the circuit would be helpful.
Unfortunately you'll need hardware, switches, LEDs, wires and maybe some other stuff. Furthermore, it's pretty hard to "look inside" the circuit, and maybe there are mistakes inside it.
I decided to develop an application, where you can "touch" all the hardware you need to do exactly this, and where you can make all the connections without soldering.
'''Implemented features:'''
- most common gates (AND, OR, XOR, ...)
- a selection window for the gates with a slider for the number of Inputs
- Inputbuttons on the gates you can activate by touching it. The colour (red/grey) indicates the state.
- the output of the gates is red / grey, indicating, wether the logical condition is true or false
- you can have several instances of the same gate with a different number of Inputs at one time.
- you can move and scale the gates as you wish
'''Not yet Implemented:'''
- the possibility to connect the gates.
That means, at the moment you can only try out different types of gates and see how they react on activating their Inputs.
Unfortunately I'm no professional in developing GUIs, so the sourcecode may be confusing. The time has come for a new version.
== Swing + MT4J ==
= Links =
* [[FTIR_Multitouch_Table]] (german)
[[Category:Projekt]]▼
= Verantwortliche =
Projekt der Fakultät Elektrotechnik und Informatik an der Hochschule für angewandte Wissenschaften Ingolstadt.
'''betreuender Professor:'''
▲[[Category:Projekt]]
Prof. Dr. Bernhard Glavina
'''mitwirkende Studenten:'''
Tanja Grotter (Projektleiterin),
Fabian Hübner,
Daniel Lohr,
Thomas Jakobi,
Markus Platzdasch,
Daniel Reinhard,
Sebastian Burkhart,
Thomas Kolb,
Benjamin Sackenreuther
| |||