852
Bearbeitungen
LittlePrinter: Unterschied zwischen den Versionen
add some info about the interior of the printer itself
HKay (Diskussion | Beiträge) (organise layout) |
HKay (Diskussion | Beiträge) (add some info about the interior of the printer itself) |
||
|
# rm ~/.ssh/authorized_keys
</pre>
= The Printer =
The printer converts the pre-formatted text and prints it onto regular receipt paper.
It also has basic software that enables it to print troubleshooting messages along with faces.
== Hardware ==
[[Datei:Little_printer_printer_v21.2_top.jpeg|200px|thumb|left|top of printer v21.2 PCB]]
[[Datei:Little_printer_printer_v21.2_bot.jpeg|200px|thumb|right|bottom of printer v21.2 PCB]]
[[Datei:Little_printer_printer.jpeg|200px|thumb|center|mechanical components of the printer]]
The long FFC connector X1(label hidden) at the top leads to the printer mechanics.
right below it is the stepper driver IC "BA6845FS".
All the other connectors on the topside are for debugging and therefore not populated.
The microcontroller is a Freescale "MC68HC908GP32". Pin 1 is marked by a little dot on the pcb.
| |||