Telepräsenzpanzer: Unterschied zwischen den Versionen

→‎2015-12-09: Bootloader
(→‎2015-12-09: Bootloader)
</pre>
 
<pre>
W90P745 Boot Loader [ Version 1.1 $Revision: 1 $ ] Rebuilt on May 11 2010
Memory Size is 0x1000000 Bytes, Flash Size is 0x400000 Bytes
Board designed by Winbond
Hardware support provided at Winbond
Copyright (c) Winbond Limited 2001 - 2006. All rights reserved.
Boot Loader Configuration:
MAC Address : 00:0D:C5:DA:E5:76
IP Address : 0.0.0.0
DHCP Client : Enabled
CACHE : Enabled
BL buffer base : 0x00300000
BL buffer size : 0x00100000
Baud Rate : -1
USB Interface : Disabled
Serial Number : 0xFFFFFFFF
 
For help on the available commands type 'h'
Press ESC to enter debug mode .....
bootloader > h
W90P745 Command Shell v1.0 Rebuilt on May 06 2010 at 13:00:07
H Display the available commands
B Set Baud Rate
D Display memory. D -? for help
E Edit memory. E -? for help
G Goto address
I information
MX Xmodem download
MT TFTP/USB download
FT Program the flash by TFTP/USB. FT -? for help
FX Program the flash by Xmodem. FX -? for help
CP Memory copy
LS List the images in the flash
SET Setting boot loader configuration. SET -? for help
CHK Check the flash
RUN Execute image
DEL DEL the image or flash block
MSET Fill memory
TERM Change the terminal output port
BOOT Reboot the system
CACHE Cache setting
USB USB interface setting
UNZIP Unzip image
ATTRIB Change the image attribution
INTF Print bootloader supported interface, ether USB or MA
</pre>
 
 
217

Bearbeitungen