Quelltext der Seite Freifunk HIL Controller Setup

== Controller ==
; Raspberry Pi 3
: 2x USB-2-Ethernet link to Router1 (connected to Uplink port and LAN1)
: 2x USB-2-Ethernet link to Router2 (connected to Uplink port and LAN1)
: 2x USB-2-Serial link to Serial console of Router1 and Router2
: 1x USB-2-Serial link to I/O Controlboard


== Setup ==
; Predictable Network Interface Names
: Neue Datei erstellen '''/etc/udev/rules.d/75-predictableNetworNames.rules'''
  SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="b8:27:eb:5d:bc:ff", NAME="pi_uplink"
  SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="b8:27:eb:08:e9:aa", NAME="pi_wlan"
  SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="ac:7f:3e:e5:f0:3e", NAME="r1_lan1"
  SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="00:e1:00:00:68:55", NAME="r1_uplink"
: ATTR ist hier die MAC Adresse des adapters
: Danach udev neustarten

== Flash vorgang ==
Der TFTP server '''atftpd''' befindet sich im paket '''atftpd'''
  /usr/sbin/atftpd --logfile=/root/scripts/flash_841/atftpd.log --daemon --no-fork /srv/tftp/
TODO: herausfinden, ob TFTP transfer abgeschlossen ist.