852
Bearbeitungen
SignageWithAlpineLinux: Unterschied zwischen den Versionen
K
keine Bearbeitungszusammenfassung
HKay (Diskussion | Beiträge) K (zwischenstand) |
HKay (Diskussion | Beiträge) KKeine Bearbeitungszusammenfassung |
||
| (6 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
|
Signage with Alpine linux on the raspberry pi
=== hardware ===
This guide works for the Raspberry Pi3 and Raspberry Pi4.
In case you want to run a viewer for Schlangenprogrammiernacht you'll need a Raspberry Pi4 as the javascript viewer ist quite demanding
=== setup image ===
* Format SD-Card as FAT32 with a MSDOS partition table
=== prepare base system ===
* start "setup-alpine"
** select keyboard language (e.g. de-nodeadkeys)
* Agree to install on /dev/mmcblk0p1▼
** choose hostname (e.g. "signage")
* install as "sys"▼
** chose interface to listen for DHCP for (e.g. eth0)
* add user e.g. "sign"▼
** select timezone (e.g. Europe/Berlin)
▲** add user e.g. "sign"
▲** Agree to install on /dev/mmcblk0p1
▲** install as "sys"
* reboot the system
* (optional) continue via SSH
* select correct repositories
* apk update▼
=== setup base system ===
* setup boot parameters
▲* apk add screen
* add file /boot/usercfg.txt with the following content
root> echo "disable_overscan=1
dtoverlay=vc4-kms-v3d
gpu_mem=128" > /boot/usercfg.txt
* (optional) switch to udev
root> setup-devd
=== setup
* install window manager
root> apk add screen
root> apk add seatd wlr-randr
root> apk add wlr-randr wtype
* start seatd on boot and add "sign" to its group
root> rc-service seatd start
root> rc-update add seatd default
root> adduser sign seat # grant sign access to seatd
* copy and edit sway config for user "sign"
sign> cp /etc/sway/config ~/.config/sway
sign> echo "
# hide cursor
seat seat0 hide_cursor 8000
# force fullhd
output HDMI-A-1 mode 1920x1080
exec
* setup autostart for user "sign"
root> echo "AUTOLOGIN_UID=1000" >> /etc/conf.d/tinydm
echo "#!/bin/sh▼
root> tinydm-set-session -s /usr/share/wayland-sessions/sway.desktop
▲ rc-update add local default
* fix file permissions▼
sign> chmod +x ~/swaystart.sh
* configure XDG_RUNTIME_DIR
sign> echo "if test -z \"\${XDG_RUNTIME_DIR}\"; then
export XDG_RUNTIME_DIR=/tmp/\$(id -u)-runtime-dir
if ! test -d \"\${XDG_RUNTIME_DIR}\"; then
mkdir \"\${XDG_RUNTIME_DIR}\"
chmod 0700 \"\${XDG_RUNTIME_DIR}\"
fi
fi" >
=== setup browser (chromium) ===
echo "#!/bin/sh▼
You can use pretty much any browser that supports wayland. The default is chromium.
* install and autostart chromium
root> apk add chromium font-noto
▲ sign> echo "#!/bin/sh
URL=https://schlangen.bytewerk.org/watch/
chromium-browser --kiosk -incognito \
--enable-features=UseOzonePlatform --ozone-platform=wayland \
--start-fullscreen --noerrdialogs --disable-infobars --disk-cache-dir=/dev/null \
--disk-cache-size=1
while true; do
# after a while all browsers begin to stutter. Here is a crude fix
sleep 600
WAYLAND_DISPLAY=wayland-1 wtype -P F5
done" >
▲* fix file permissions
=== setup browser (falkon) ===
In case you don't want to use chromium you can also use another browser. For instance falkon.
▲ chmod +x /home/sign/swaystart.sh
* install and autostart falkon
sign> apk add falkon font-noto
▲ sign> echo "#!/bin/sh
URL=http://example.com/
falkon -e -i -f $URL &
while true; do
# after a while all browsers begin to stutter. Here is a crude fix
sleep 600
WAYLAND_DISPLAY=wayland-1 wtype -P F5
done" > ~/swaystart.sh
=== setup SPN viewer ===
root> apk add font-noto-emoji # for snake emojis
| |||