Freifunk HIL Controller Setup: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
HKay (Diskussion | Beiträge) (init) |
HKay (Diskussion | Beiträge) (alle interfaces umbenennen) |
||
| Zeile 1: | Zeile 1: | ||
== Controller == |
|||
; Raspberry Pi 3 |
; Raspberry Pi 3 |
||
: 2x USB-2-Ethernet link to Router1 (connected to Uplink port and LAN1) |
: 2x USB-2-Ethernet link to Router1 (connected to Uplink port and LAN1) |
||
| Zeile 11: | Zeile 11: | ||
: Neue Datei erstellen '''/etc/udev/rules.d/75-predictableNetworNames.rules''' |
: Neue Datei erstellen '''/etc/udev/rules.d/75-predictableNetworNames.rules''' |
||
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="b8:27:eb:5d:bc:ff", NAME="pi_uplink" |
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="b8:27:eb:5d:bc:ff", NAME="pi_uplink" |
||
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="b8:27:eb:08:e9:aa", NAME="pi_wlan" |
|||
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="ac:7f:3e:e5:f0:3e", NAME="r1_lan1" |
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="ac:7f:3e:e5:f0:3e", NAME="r1_lan1" |
||
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="00:e1:00:00:68:55", NAME="r1_uplink" |
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="00:e1:00:00:68:55", NAME="r1_uplink" |
||
: ATTR ist hier die MAC Adresse des adapters |
: ATTR ist hier die MAC Adresse des adapters |
||
: Danach udev neustarten |
|||
Version vom 4. Dezember 2016, 17:20 Uhr
Controller
- Raspberry Pi 3
- 2x USB-2-Ethernet link to Router1 (connected to Uplink port and LAN1)
- 2x USB-2-Ethernet link to Router2 (connected to Uplink port and LAN1)
- 2x USB-2-Serial link to Serial console of Router1 and Router2
- 1x USB-2-Serial link to I/O Controlboard
Setup
- Predictable Network Interface Names
- Neue Datei erstellen /etc/udev/rules.d/75-predictableNetworNames.rules
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="b8:27:eb:5d:bc:ff", NAME="pi_uplink"
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="b8:27:eb:08:e9:aa", NAME="pi_wlan"
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="ac:7f:3e:e5:f0:3e", NAME="r1_lan1"
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="00:e1:00:00:68:55", NAME="r1_uplink"
- ATTR ist hier die MAC Adresse des adapters
- Danach udev neustarten